Tag: razor blade

Post #1689: Strop-a-Palooza, Part 1: Historical Perspective.

 

The last thing I need to do, to finish this deep dive into understanding wet shaving, is to learn how to strop a razor blade.  In particular, how to strop a stainless-steel razor blade.  Correctly.  So that it actually sharpens the blade.

I have no practical reason to do this.  Now that I understand the importance of using shaving cream instead of soap, I find that my razor blades last a long time.  Currently, I’m on shave #8 on a single Personna stainless steel blade, shaving with Barbasol.  I’m just starting to see the first bit of blade wear

So the blades won’t last forever.  But at that rate, I probably already own a more-than-lifetime supply of razor blades.  And so, I have no practical need to try to extend the life of a blade.

Instead, this is more a question of separating fact from fiction.  As with the rest of wet-shaving lore, when I look at ways to re-sharpen a razor blade, I see a lot of stuff that just looks nuts.  And I see a lot of clever antique devices that look downright interesting.  What’s missing is anybody taking the time actually to test these methods and determine whether or not they do, in fact, work.

So that’s the purpose of this next set of exercises.  History.  Fact vs. fiction.  Historical methods.  Ending with a practical method for stropping a stainless steel razor blade.

Just to jump ahead, I think I’ve already figured out what that’s likely to be.  It’s like to be honing the blade using polishing compound on the inside surface of a Pyrex container.  But it’s going to take me a while to explain how I got to that conclusion.

A history of razor blade stropping devices

Part 1:  Sears and Roebuck Catalog.

Source and credit:  All illustrations in this section are from Sears and Roebuck or Montgomery Ward catalogs.  All early years are from an on-line collection maintained by the University of Illinois, which you can access by starting at this link:  https://libraryguides.missouri.edu/pricesandwages/1910-1919.  Catalogs from later years are via https://christmas.musetechnical.com/

The decade of the 1930s was the heyday of stropping razor blades to re-sharpen them.  Sears offered multiple models of stropping device, including electric stroppers.  The razor blade market still appeared to be dominated by cheap (and easily stropped) carbon-steel blades, and Sears flatly stated:  “Stroppers make razor blades last longer”.

But by the time you get to WWII, electric razors were the in thing, Sears was pushing stainless steel blades, and stroppers had all-but-disappeared from the catalog. One self-stropping razor set was all that was left of the notion to strop blades to extend their life.   The more conservative Montgomery Ward still offered a stropper, but it was the same model that had been invented in the 1920s.

Of particular note:  In 1940, Sears told you that you didn’t need to dry off stainless steel blades.  That’s 80 years ago.  And people will still incorrectly tell you that you need to dry off your razor blade after each use (Post #1686).  Such is the power of folklore.

Edit:  Nope, see Post #1699.  If you live in an area with hard water, you do, in fact, need to dry off your razor blades.  The issue isn’t rust/corrosion (for stainless-steel blades), it’s that water spots (mineral deposits) coat the razor edge and dull it.  See that post for details.

As of the 1955 Sears catalog, there’s zero mention of stropping, but Sears is still offering a mix of carbon-steel and stainless-steel blades.  By 1965, razors had disappeared entirely from the Sears catalog, and Sears only offered stainless steel blades, no carbon-steel blades.  By 1975, “razor” doesn’t even appear in the index, and the only shaving options shown are electric shavers.

Decade-by-decade detail follows.

Sears & Roebuck, 1918

As I found out courtesy of the 1918 Sears and Roebuck catalog, razor blade stropping was an expected part of shaving with a safety razor at that time.  Sears sold a clever device consisting of leather rollers, a blade holder, and a crank.

Sears & Roebuck, 1924

Not much had changed by the 1924 Sears catalog.  That same stropping device (now branded Kanner’s) was sold, along with an even-more-complex “Twinplex” stropper (above).  There were also several razors marked as “self-stropping”, which appears to mean that you could attach a leather cylinder to the razor itself, which would then roll across your skin and strop the back of the blade as you shaved.

Not shown, the catalog offered a broad array of shaving soaps, largely in stick form.

Sears and Roebuck, 1936

By the time you get to the 1936 Sears & Roebuck, the stropping market had expanded, and Sears boldly claimed that “Stroppers make razor blades last longer”.  If it says it in the Sears and Roebuck, it’s so.

I see two notable changes beyond the proliferation of products.  First, there’s an electric stropper on the market.  But Sears is also offering honing stones specifically designed for honing razor blades.  Note the “Duplex Home”, with a curved side made specifically for honing razor blades.  That comes up again in the next section on stropping artifacts.

Up to this point, all razor blade stroppers had been variations on a standard leather strop.  They rolled the strop up into a cylinder.  But it was still a piece of stout leather, rubbed at the correct angle against the underside of the blade.  But now we also have a curved honing stone specifically for honing razor blades.

The other notable change was the explosion in the offerings of razor blades, and the plummeting price of blades.  Note that Sears now offered blades in bulk at less than 1 cent per blade.  So this must have been the generation when safety razors really took off.  I also note the many blade manufacturers offered chromium steel blades, which, from the consumers’ point of view, would have been indistinguishable from stainless steel.

Not shown, this catalog offered many different shaving creams.  That was a change from 1924, when only shaving soaps were listed.

Sears and Roebuck, 1940.

First, not shown, electric shavers were clearly the “in” thing.  Sears devoted almost an entire page to them.

Second, Sears was offering stainless steel blades as a premium product.  Normal carbon-steel blades were still less than a penny each.  Their stainless steel blades, advertised as long-lasting, were 6 cents each.

Of special note, way back in 1940, we already knew that there was no need to dry off a stainless steel razor blade.  Sears explicitly says that with stainless steel blades, there is “No need to wipe off”.  And yet, here we are, 80 years later, and every wet shaving site you come to still tells you how important it is to dry off your blade after use.  (See edit above — you need to dry them in areas with hard water.)

At this point, Sears is no longer offering a stropper, and offers just one “self-stropping” razor set.

Montgomery Ward, 1942

Here, I found it notable that Wards also offered stainless steel blades.   No ambiguity, with a promise that they’d never rust.  The price of bargain blades had fallen to less than a penny a blade.  As with Sears, the stainless blades were a premium product, costing 5 cents each.

Wards continued to offer the “Twinplex” stropper that had first appeared in the 1920s.

Sears & Roebuck, 1955

By this time, all the emphasis is on electric shavers.  There’s one small section for safety razors.  No mention of any type of stropping device anywhere.  Sears continues to offer both cheap carbon-steel blades and stainless steel blades.

Sears, 1965.

By the time you get to 1965, the only shavers offered by Sears are electric.  This year they featured many models of cordless electric shavers.  The offered no razors.  Certainly no strops.  And all the razor blades on offer were stainless steel.  Carbon steel blades had disappeared from the Sears catalog.

Sears, 1975

At this point, the word “razor” no longer appears in the index of the catalog.  You have to look for “shavers”.  And, sure enough, all they sell now is electric shavers.  The only vestigial nod to wet shaving is the hot shaving cream gizmo pictured above.

Part II:  I bought it on Ebay.  Other vintage razor-blade stropping devices.

Source and credit:  All illustrations in this section are from Ebay.  I will try to be sure to give a link to each individual listing that I use.

If you look on Ebay you can find examples of most of the stropping machines and self-stropping razors show in the Sears catalogs.  These are incredibly helpful for figuring out how those devices work, because the Ebay listings typically show multiple photographs from different angles.

By and large, the stropping devices shown in the Sears & Roebuck were leather cylinders, turned in some fashion, with some way to hold the blade in the proper position against the leather.  Fundamentally, they were no different from a traditional leather strop used with straight razors.  Merely made smaller and adapted to the form of the safety razor blade.

Instead, in this section I’m going to concentrate on razor-blade stropping devices other than the box-with-leather-roller types shown in the Sears and Wards catalogs.

Finally, let me be clear that I’m only interested in tools that could be used to hone or strop safety razor blades.  In particular, I need to avoid tools and devices designed for straight razors.

At the end of the day, a curved sharpening stone or even just a curved piece of hard glass appears to be the most common non-leather tool used to re-sharpen razor blades.  For those where instructions were evident, all of them said to use a light touch.  I have to assume that the curve of the stone or glass then aligns with the angle of the razor edge, and that the stone or glass itself is hard enough to strop or polish the razor edge.

Criss-Cross leather disk strop.  Click here for Ebay listing.

This is a leather disk, turned by a crank, with a blade holder sitting above the disk (in the upper right).  Put the blade in the holder, let it down onto the leather disk, and crank to strop the back of the blade.  Basically, this is just another variation on a traditional leather strop, fit to the form factor of a safety razor blade.

Curved sharpening stones

These are all sharpening stones with a curve cut into them.  You lay the blade in the curve, so that both edges touch the stone, and lightly rub it in a circular fashion.

Safety razor hone.  Click here for Ebay listing.

Safety razor hone 2.   Click for Ebay listing

Safety Razor hone 3.  Click here for Ebay listing

Curved glass strops/hones

I had never heard of using glass as a strop or hone, but there are several variations of that represented on Ebay and elsewhere.  Based on one set of instructions, I think these work just like the curved stones.  You lay your blade in the curve, edges touching the glass, press down, and just kind of move it around in a circles over the glass.

Curved glass razor hone 1.  Click here for Ebay listing.

Glass razor hone 2.  Click here for Ebay listing

Glass razor hone 3.  Click for ebay listing.

Velvet glass sharpener. Click here for Ebay listing.

Pretty sure this one works the same way as the others, you just use the inside of the glass as the curved edge of the glass.

Other/weirder stuff

Magnetic razor-blade sharpener.  Click for Ebay listing.

Well, that’s just hilarious.  I came across a modern version of this the other day.  The claim here is that by something-something-something magnetic fields something-something-something, and presto, the blade is resharpened.  It’s Science!  I assumed the modern one was a scam, and I’d bet that this is merely a 60-year-old scam.

Bakelite razor sharpener.   Click here for Ebay listing.

 

 

 

 

 

I’ve seen several models like this, mostly from Eastern Europe or the Soviet Union.  All of them have this clamshell design, with what I assume is some type of sharpening media, but I have no clue how this works.

Summary:  Some clear direction for stropping stainless steel blades.

I’m pretty sure that most common glass is not quite hard enough to be used to sharpen stainless.  Glass comes in around 5 to 6 on the Mohs scale.  Stainless, if you can put it on that scale, varies, but goes up to at least 7, depending on who;s counting.

That said, nothing would stop me from putting a little polishing or fine grinding compound on a piece of curved glass, and having at it with a stainless steel blade.

Finally, borosilicate glass (Pyrex) comes in around a 7.5 on Mohs.  So, arguably, the 21st century analog of resharpening carbon-steel blades using soda lime glass would be to resharpen stainless-steel blades using borosilicate glass.

So I think that’s the direction I’m going to take.

Post #1688: Winning the Game of Razors-and-Blades.

 

When I started this series of posts, I was bewildered by the market for wet shaving.    Four questions stood out.  Really, two pairs:  One about economics, one about performance:

  1. Why do manufacturers keep coming up with ever-more-absurd gimmicks for shaving cartridges?
  2. Why does a shaving cartridge typically cost a buck or more, but a double-edged razor blade costs ten cents?
  3. Why do some people report getting a ludicrously high number of shaves from a single blade or cartridge, while others report re-use in the low single digits, for the exact same blade or cartridge?
  4. Is any of the folklore around ways to extend the life of a razor blade true?

After doing my research, I reached a state of razor enlightenment.  It all makes perfect sense.  So let me start by ‘splaining what I think I know.  Then finish with a short discussion of stropping. Continue reading Post #1688: Winning the Game of Razors-and-Blades.

Post #1687: Razor blades, some economic footnotes

 

I set out to compare modern prices for razor blades to prices from earlier eras.  I got a lot more than I bargained for.  Turns out, there really is nothing new under the sun.  Except that razor blades have gotten a lot cheaper over time.

The basic question is, how cheap are modern razor blades?  Compared to what they would have cost historically, that is.

But the fun part is the 1918 Sears & Roebuck catalog.  This post is worth it for that alone.

 

They cost how much?

If you wanted to know about historical food prices, or typical rents, or average family income, or the cost of gasoline from bygone eras, you can find that information.  Those were all important commodities, and their prices were duly tracked and recorded.

By contrast, there’s no such luck for a cheap disposable product like a razor blade.  Nobody really much cared about them, in the sense of preserving their prices for history.  Nobody systematically recorded information about them.  And that makes it hard to find out what they used to cost, way back when.

Initially, all I could do was look for bits and pieces of advertising.

Even then, the only razor company modern historians much care about is Gillette.  And Gillette was not only a super-premium product, Gillette also played fast-and-loose with their pricing, owing to patents on some key aspects of safety razors early in that era.

In fact, there is a term-of-art in economics called “razors-and-blades“, to discuss profit-maximizing strategies for companies who sell razor handles that will only fit their razor blades.  Think inkjet cartridge pricing, and you’ll get the gist of it.  And, sure enough, once you’re locked into a handle, the manufacturer tries to extract the as much money as possible in the cartridges.

Let me start with Gillette’s list price for blades.

I am supposed to say something like “Gillette introduced the safety razor in 1904”, but that’s not even remotely true.   One can find ads for “safety razors” for many decades prior to that, all with the same basic design of a blade contained in some sort of housing, to make it hard to cut yourself.

What Gillette actually invented was the cheap, stamped-steel disposable razor blade (per Wikipedia).  And, of course, the razors that would use those blades.  Before Gillette, most safety razors had a permanent blade, designed to be re-sharpened.  Gillette got the idea to do away with a permanent, knife-like razor and substitute a disposable blade.

At that time, Gillette’s razor was marketed as a superior and more sanitary way to shave, owing to the reduced likelihood of nicks and cuts from shaving.  It commanded an appropriately premium price.

From 1904, until his patents ran out around 1924, Gillette razor blades were priced at 12 for a dollar, or 8.3 cents per blade.  That was the list price, and some sources suggest that discounting was common.

But taking that 8.3 cents at face value, I’ll translate that to current dollars using the BLS inflation calculator.  That only goes back to 1913, but it tells us that 8.3 cents, in 1913, is the equivalent of just over $2.50 in today’s (December 2022) money.  Per blade.

As noted in prior posts, current prices on double-edge razor blades range from about 5 cents each at the low end, to about 40 cents each for high-end Japanese Feather brand blades.   It’s reasonable to say you have your pick of medium-quality blades around 10 cents each.  (Those are all Amazon prices for lots of 100 blades.)

Thus a modern stainless-steel quality razor blade costs about 4 percent of what a name-brand, list-price Gillette razor blade originally cost.

But wait, there’s more.  Average (family, I think) income in that era was about 750 dollars per year.  (Based on various sources).  Median family income today is about $71,000.  So, as a fraction of a year’s income, a modern 10-cent razor blade is just 1.3 percent as costly as Gillette’s original 8.3 cent blade.

Thank goodness for Sears & Roebuck.

But wait:  Gillette was not the only blade on the market, it was just the best-advertised.  And likely the most expensive.  A comparison to the Gillette list price overstates how costly razor blades were, on average, at the dawn of the disposable razor blade.  Unfortunately, the earliest pricing I can find on other blades dates to the WWI era.

I stumbled across a University of Missouri collection of old mail-order catalogs, all scanned and available on-line.  You can get access to from this URL:  https://libraryguides.missouri.edu/pricesandwages/1910-1919.

With that in hand, it’s just a question of looking up razors in any year’s catalog and see what’s on offer in the Sears & Roebuck.  And it’s a real eye-opener.

Let me take the 1918 Sears and Roebuck catalog, despite that being in the middle of WWI.  The source for all the images below is page 1321 of the 1918 Sears and Roebuck catalog, via the University of Illinois.  Clicking this link should take you to a page that’s about 20 pages earlier in the catalog.  Just page down to get to razors.

The first surprise is that stainless steel blade are NOT a 1960s invention.  Check out this 1918 Sears & Roebuck ad, for a razor and 12 chromium steel blades.  While technically incorrect, the term “chromium steel” is often used interchangeably with “stainless steel”, for the simple reason that it behaves like common stainless.  It’s very hard, and it’s rust-proof.

Second, as is true today, you could also purchase carbon steel blades.  Oddly, you will note that the chrome steel blades are NOT a premium product.  At 12 for 38 cents, they are actually cheaper than the “crucible steel” blades at 5 for 20 cents.  (I believe that, in that era, “crucible steel” was a catch-all term for higher-quality steel carbon steel, free of inclusions or impurities.)

Third, Gillette’s stuff was, indeed, pricey.  Here you can see Gillette blades at 6 for 39 cents.  That’s about twice the price of the most expensive blade on the illustration above.  The complete shaving outfit from Gillette was four times the price of a similar outfit from the off brand.  (Also, what’s with “We do not exchange old blades.”?)

Finally, re-sharpening blades by stropping must have been common practice.  Not only do most of the razor outfits include “stropping handles”, Sears sold two different stropping devices, one to fit Gillette blades and one to fit most other blades.  This comports with the findings from my tests, where stropping definitely cleaned up and re-formed the razor edge of a used blade.

I now wonder whether stropping might have been more effective on old-style (softer) carbon-steel blades, than on chromium steel.  That’s sure the case with knife sharpening.  It’s vastly easier to sharpen a high-carbon steel blade on a whetstone than it is to sharpen a stainless blade.  Perhaps that explains the lack of premium pricing for chromium steel blades in that era?

The calculation, redone.

The cheapest blades offered above appear to be the 12-for-38-cent chromium steel ones, or about 3 cents per blade. In addition, with all that stropping going on, I bet those blades were used longer than modern blades are.  But I have no way to factor that into my calculation, absent any data on average shaves per blade in that era.

At face value, then, the best bargain on blades in the 1918 Sears & Roebuck catalog translates to about 66 cents per blade in modern money (using January 1918 as the basis for pricing, WWI saw a brief but very sharp round of inflation in the U.S.)

Or, crazily enough, just about what a low-end name-brand disposable cartridge costs today.  Still a good bit of money relative to the average family income.  But not nearly as expensive as the list price for Gillette blades would have suggested.

Really, almost the only structural difference between the 1918 market and the modern market is that disposable blades had not yet been standardized.  Gillette blades fit Gillette razors.  (Again, just like disposable cartridges today.)  Other brands seemed to have adopted a more-nearly-interchangeable standard.

If I had to point to one subtle-but-important difference, it’s in the quantities.  Recall, this is a mail-order catalog, with all the time lags that implies.  And yet, no razor blades were offered in lots larger than 12.  And everybody seemed to offer either a stropping machine or a manual strop for use on their blades.  Together, this suggests to me that you were expected to use each blade for quite a long time.

As opposed to Amazon, today, where almost any blade you’d care to buy can be had in a box of 100.  And “strops” for disposable razor blades are niche-market oddities.  Which both suggest that we probably re-use blades a lot less in the modern world than they did back in 1918.

Post #1686: Three shaving myths, tested.

 

Starting back in Post #1672, I decided to test internet-based advice on how to extend the life of razor blades and disposable razors. EDIT:  And I’ve had to change some of the answers, after further, research, as shown below.

At this point, the answers are obvious, and I’m kind of tired of having razor blades sitting around all over my bathroom.  So I’m calling it a day and presenting the results.  Despite not having done the purest possible tests, I’ve done enough to be confident that I have the facts straight.

It boils down to this, for three commonly-offered suggestions for extending the life of a razor blade or disposable shaver.

  • Carefully dry your razor blade after use:  BUSTED. CONFIRMED
  • Strop your razor blade to re-sharpen it:  PLAUSIBLE BUSTED
  • Soften your beard/lubricate your face:  CONFIRMED

Details follow.

Carefully dry your razor blade after use:  BUSTED, for rust, but CONFIRMED for hard-water spots.

If this were 1960, “dry your blade” would be excellent advice.  At that time, most razor blades were made from a hard carbon-steel alloy.  Carbon steel rusts.  And rust will surely destroy the delicate edge of a razor blade.  But these days, you are hard-pressed to find double-edged razor blades that aren’t made of stainless steel.   (Treet brand is the only one I know of.)

The key point is that stainless steel doesn’t rust.  (Well, decent-quality stainless will not rust in the bathroom.  Some stainless, in some environments, will rust.)  In particular, there’s no rust on the blades I use (Persona), despite sitting around in a damp “used razor blade bank” for years.

My guess is that “dry your blade after use” is folk wisdom that was passed from parent to child. Once upon a time, it was good advice.  But I’m pretty sure that it has been made irrelevant by the switch to stainless steel.  It remains good advice only for the rare blade that is still made out of rust-able carbon steel.

At any rate, I decided to test this one “backwards”, so to speak.  If keeping a razor blade wet for long periods of time does not harm it, then, as a matter of logic, drying it off does it no good.

So I took some razor blades — some new, some used — and kept them wet.  The razor blades pictured above have spent the last week with one edge wet and one edge dry.  They were either continuously wet (in a wet sponge) or periodically wet, and allowed to dry by sitting around at room temperature.  The other edge of each blade was either kept dry, or dry-and-oiled.  Presumably for extra protection.

Below see microscope view of the results.  Each photo contrasts one blade edge that was subject to the “abuse” of being kept wet, for the better part of a week.  The other blade edge was carefully kept dry.

Can you guess which one is the abused, wet edge, and which is the carefully-cared-for dry edge?

 

 

In all three cases, the wet, abused edge is on top.  I surely see no difference between the two edges.

I then tested both edges of the dry-and-oiled blade on my crude D-I-Y sharpness tester (Post #1684).  This latest version of the sharpness tester has considerable variance from test to test, but by taking five samples on each edge, I ended up with an average of this much pressure required to split a stout thread:

  • Dry-and-oiled edge:  17 grams
  • Continuously wet edge:  18 grams

In other words, the two edges are equally sharp, within the limits of of resolution of my crude testing setup.  Keeping the edge wet for a week did nothing, compared to keeping the edge carefully dry and oiled.

Caveats:  Of course, I can’t test every possibility.  Plausibly, you might be unlucky enough to have purchased carbon-steel blades.  Perhaps your water is so acidic that it can eat stainless steel.  And so on.

But there’s a simple-enough test.  Leave your blades wet.  If your blades rust, then you need to dry them carefully after each use.  If they don’t, not.

Conclusion:  For the typical shaver, with normal tap water, leaving a stainless steel razor blade wet does absolutely nothing to it.  Doesn’t rust it.  Doesn’t pit the edge.  Doesn’t dull the edge.  That’s not a surprise because that’s exactly what’s supposed to happen with stainless steel.  But, if keeping them wet all the time does nothing, then keeping them dry also does nothing.  By inference, the notion that razor blades will last longer if you carefully dry them is simply out-of-date.  Great advice for shaving in 1960.  Irrelevant for modern stainless-steel blades.

EDIT 2/26/2024:   But that method — keep the edge wet — only tests for rust.  As it turns out, rust isn’t the issue.   The issue is water spots.  If you have even moderately hard water, and you don’t dry your blade, the evaporating water will leave behind thin deposits of calcium carbonate, a.k.a., water spots.  And, goofy as it sounds, a water spot is a hard mineral deposit that is much thicker than the edge of a razor blade. As a result, if you let water spots form on your razor blades, you’ll get a lousy shave.  That’s laid out and tested in Post #1699. 

The upshot is that “dry your blade” is good advice for most people, but not due to rust or oxidation.  (Not if you use stainless-steel blades.)  That’s because most tap water contains enough dissolved minerals (“hardness”) to form water spots. 

That said, all of the other goofy advice aimed at blade oxidation — keep your blade in oil, keep it in the freezer, and so on — is useless.  At least for modern stainless-steel blades.  You don’t need to go to extremes to prevent oxidation, because they simply don’t oxidize under normal bathroom conditions.

Strop your razor blade to re-sharpen it:  PLAUSIBLE, but ultimately, BUSTED

Here, I’ll just refer you back to Post #1673.  Stropping a used blade on an improvised leather strop definitely changed the edge of the blade.  Below, you see the same used blade, before and after stropping.

 

After stropping, the edge is much smoother and almost returns to a like-new appearance.

Unfortunately, stropping also appears to remove the double-faceted aspect of the factory edge.  (Which makes sense, when you think about it.  You can only strop it at one angle.)

In the end, neither my crude sharpness tester nor my face could tell that the stropped blade was better than the original used blade.  Maybe that’s because I wasn’t using my blades very long — see third section below.  So I find it plausible that if you wore a blade down to where it was un-usable, stropping could restore the edge enough that you could continue to use it.  For some additional time, at least.  Maybe?

But, as with a straight razor or a knife, stropping has its limits.  If the edge gets sufficiently worn, you have to re-sharpen it, which is a different process entirely.  So I don’t think stropping will allow you to use a blade indefinitely.

Conclusion:  I didn’t prove it, but it’s plausible that stropping a razor blade extends its usable life.  That’s based on the much fresher-looking edge that stropping creates, as shown above.  Straight razors get stropped to refresh the edge.  There’s no reason that wouldn’t work on razor blades.  With the caveat that stropping a razor blade will eventually eliminate the factory double-faceted cut of the razor edge.

Edit 2/24/2024:  I have since gone on to try wide variety of different methods for stropping a stainless-steel razor blade, up to and including buying an actual razor strop and stropping compound, as well as stropping a blade on a knife steel.  Stropping a modern stainless-steel blade makes the edge look better, but it absolutely does not restore a dull blade to usability.  I think my last post in that series is Post #1692.  My post-stropping conclusion was “still doesn’t shave worth a damn”.  And that’s what I’m sticking with.

In the end, the practice of stropping razor blades died out as stainless-steel blades took over the market, and I think there’s a good reason for that.  Those blades are just too hard. 

For sure, all the goofy internet advice (strop it in the back of your arm, or on your jeans trouser leg, or on the inside of a glass, …) is wrong.  For stainless-steel blades.  Stainless is just too hard for that to have any effect.  But I went the extra mile, and used what should have been the right materials for stropping.  In this post, I used a knife steel, and in a prior post, I used an actual leather razor strop and compound.  (Which is what you would use on, say, a stainless-steel straight razor.)  And none of that restored a dull stainless blade to sharpness.

Soften your beard/lubricate your face:  CONFIRMED

If nothing else, this razor blade test has broken me of a life-long bad shaving habit.  I shave(d) with soap.  Most recently I’ve been using Dove, because that’s supposed to have more emollients in it and be generally nicer to your skin.

And, not unrelated, I’d typically get three shaves out of a blade before I got the urge to replace it.  Maybe five, at the outside.  But by the time I got through that fifth shave, it required multiple passes of the blade and, basically, it hurt.

For this final test, I decided to shave half my face using Dove soap, and half with Barbasol.  The main active ingredient in Barbasol is stearic acid.  That’s the same as the main fat in coconut oil, and it is frequently recommended as a beard softening agent.  (And, as it turns out, almost all shaving creams have almost exactly the same main ingredient — see the end section of Post #1688.)

Three things happened.

1:  After the first shave, I was sold on Barbasol.  Immediately, unambiguously, and obviously better.  Vastly less skin irritation than shaving with Dove soap.

2:  But, weirdly, as time wore on, the difference between Barbasol and soap seemed less pronounced.  And the two edges of the razor blade (one for soap, one for Barbasol) did not appear materially different.  I’m pretty sure that’s because the active ingredient in Barbasol penetrates the skin and hair follicles.  In effect, it softens not just the hair above the skin but the hair below the skin as well.  And by swapping which side of my face got the Barbasol, with each shave, I was actually providing some residual protection to both sides of my face, all the time.

3:  I just got through my sixth shave with Barbasol.  One blade, six shaves, no problems.  No irritation.  No nothing.  That never happened with soap.

And, as importantly, almost no visible blade wear yet.  Here are two microscope views of a new blade next to a blade after six shaves with Barbasol.

 

Tough to tell which is which, isn’t it?  The new blade is on the left, the used blade is on the right.  My used blades never looked like that when I shaved with soap.

So, I screwed up the formal testing on this one, by alternating which side of my face got the Barbasol.  But the results are clear enough.  Despite the lack of controlled test, I’m calling this one confirmed.  I’ll keep counting shaves, and at some point, I’ll edit this for the final count.  But I’ve already exceeded what I can get out of a blade with soap.  And I’m at about twice the number of shaves I normally get out of a blade, with soap.

Whether this occurs solely due to the reduced blade wear shown above, or in addition to the increased comfort of the better-lubricated shave itself, I can’t say.  But, for sure, the combined effect is to give me a lot more shaves per blade.

YMMV.  I don’t have a particularly tough beard to start with.  And my comparison is off-the-shelf Dove bar soap.

I guess real shaving aficionados laugh at something as pedestrian as Barbasol.  I should be using yak butter, or some such.  I don’t care.  It’s been around forever.  It’s made in America.  It’s a few bucks a can, which works out to maybe 2 cents a shave.  And it works.

I see no reason to look any further.

Here’s the kicker:  Not only is shaving with Barbasol a lot more comfortable, it’s almost certainly cheaper than shaving with soap.  The per-shave cost of the Barbasol (about two cents, best guess) is more-than-offset by the reduction in per-shave cost of the blade wear-and-tear.

As a result, I now realize that the way I shaved for my entire life (up to now) was both more painful and more expensive.  Oh for dumb.

Conclusion:  I can’t speak to every possible way to soften your beard or lubricate your skin.  But Barbasol obviously extends the usable life of razor blades, for me.  Relative to shaving with Dove soap.

Conclusion

I could have done this whole analysis better.  But I think I did it well enough to know what’s what.

And, there are almost certainly other tricks that might or might not work.  For example, some people carefully flip the blade between shaves, presumably so that both sides of each edge get equal wear.  But this expert says no dice on that one.  You get the same number of shaves either way.  Which makes sense to me.

The final upshot is that I know as much about this topic as I will ever need to know.

The whole reason I started this experiment — the need to buy my next tranche of razor blades — no longer exists.  By switching from soap to Barbasol, it will be years before I’ll have to buy more blades.

Post #1685: Razor blade experiment, unexpected results, and a redo.

 

I’m currently performing a brief experiment to see whether softening my beard prior to shaving will prolong the useful life of the razor blade.

See if you can spot what I screwed up in my experimental design:

  • I have one safety razor and one blade.
  • I marked one edge of the blade with “Barbasol”.
  • Each day I shave half my face with Dove soap, and the other half with Barbasol.
  • I always use the Barbasol edge of the blade on the side of my face with Barbasol on it.
  • I alternate sides to eliminate any left-right differences (in my face, in holding the razor).  One day, Barbasol goes on the left side, the next day, on the right.
  • I rinse both sides of my face with tap water when I am done.

Here’s a hint.  On the first day of the experiment, I became an instant Barbasol convert.  The side shaved with Dove soap stung quite noticeably.  No sting on the Barbasol side.  But as the experiment has progressed, somehow, the soap side still stings a bit, but not nearly as much as it did at the outset.

In any case, after four shaves, I expected the soap side of the blade to be worn out, because that’s roughly normal for me.  You can see microphotographs of worn blades in my earlier posts in this series.  That’s what I expected to see.

To my surprise, when viewed under a microscope, there’s no material difference between the soap and Barbasol sides of the blade, at the four-shave mark.  And both sides are still in very good shape.

What?  That can’t be right.

Now that I have read a bit more about beard softening agents, I believe my mistake was in alternating sides of my face.  As it turns out, oils commonly used as beard softeners, including stearic acid (the principal active ingredient in Barbasol):

  • Penetrate the surface of the skin (e.g., reference).
  • Penetrate into the hair follicle
  • Penetrate the shaft of the hair to some degree
  • Enough so that they actually have measurable effects on hair metabolism (e.g., reference).

I’m pretty sure the upshot of all that is that it’s a mistake to swap sides of the face each day.  The most straightforward explanation of the lack of difference between two sides of the blade is that I’ve been accidentally softening the beard on both sides of my face.

Basically, Barbasol leaves enough softening “residue” to mess up the experiment, if you alternate sides of the face.  It not only softens the beard AT skin level, it probably softens the beard BELOW skin level.  Which then becomes tomorrow’s shave-able beard.  And it softens the entire top layer of the skin, to boot.

To do this right, I have to change the protocol and not switch sides from day to day.  Which I will do henceforth.  But this clearly delays the final results.

Live and learn.  Or draw incorrect conclusions from faulty experimental method.

Post #1683: The Great Razor Blade Experiment, stopping early for benefit.

 

This is part of an ongoing series to test various internet-based suggestions for extending the life of a razor blade.  You can see the background for this in the Post #1672.  The setup for this experiment is given in Post #1677.  Start of experiment is given in Post #1679 Continue reading Post #1683: The Great Razor Blade Experiment, stopping early for benefit.

Post #1677: Planning the rest of my razor blade experiment.

 

This is part of an ongoing series to test various internet-based suggestions for extending the life of a razor blade.  You can see the background for this in the Post #1672.

I suppose that any group of people obsessed with the minutia of some activity will seem a bit odd to the rest of us. But the more I dive into on-line shaving culture, and on-line blade-sharpening culture, the weirder it gets.

Continue reading Post #1677: Planning the rest of my razor blade experiment.

Post #1672: Does anything really extend the life of a razor blade? Part 1, the setup.

 

Six years ago I decided to start using an old-fashioned (“double edged”) safety razor. 

I got a couple of “blade samplers” from Amazon — collections of maybe a dozen different brands, five blades from each brand.  I then bought a 100-count box of Persona blades.  They got good reviews and, at that time, they were made in Virginia.

Sometime this year, I’ll probably have to buy razor blades again.  So, obviously, we’re not talking about a huge per-diem expenditure, for shaving.  Nevertheless, whatever I buy this time, I’m going to end up living with it for years.  So I’ve been revisiting the market for double-edge razor blades.  And, incidentally, disposable razors. Continue reading Post #1672: Does anything really extend the life of a razor blade? Part 1, the setup.